PaulsRobot

This R3X module is not really a beginner's module, although it is not too tricky to use. It should be possible to get good results from it once the user is familiar with:

• The Rub & Yawn procedure and how it is used in PaulsRobot sessions
• The glossary of terms used at PaulsRobot, especially those central to the R3X module
• The basic idea of how a topic (feeling, incident, series of incidents, relationship etc.) is addressed both with the usual 6-Direction technique and also R3R (personal time-stream recreation procedure).

The end point for an R3X session is shown on the page R3X: Session End Point.

You should have a WRITTEN C/S (Case Supervisor instruction) for the session before you start. You can write this yourself if you don't have someone else acting as C/S (Case Supervisor). The reason for writing it is so that you know what you will be doing in the session, and don't go off on some wild tangent. It is usually a bad idea to do a session without a written C/S which you keep to in session. If the C/S (instruction) turns out to not be working in session, then end off the session and write a different C/S outside of session.

Great! Let's do the full pre-session check to make sure I'm ready for the session.

I'm familiar with what is needed. Let's go with the final check!

Lemme outta here!