|
Morph is one of the four basic PaulsRobot modules that cover pretty much all the different ways of addressing and discharging a topic. They are probably best used in the order Core, HeavyDuty, R3X, Morph. It includes about 130 different ways of manipulating the factors making up a topic. It is a Rub & Yawn module, and the user should be familiar with this procedure before starting to use the Morph module. The end point for a Morph session is shown on the page Morph: Session End Point. You should have a WRITTEN C/S (Case Supervisor instruction) for the session before you start. You can write this yourself if you don't have someone else acting as C/S (Case Supervisor). The reason for writing it is so that you know what you will be doing in the session, and don't go off on some wild tangent. It is usually a bad idea to do a session without a written C/S which you keep to in session. If the C/S (instruction) turns out to not be working in session, then end off the session and write a different C/S outside of session. Great! Let's do the full pre-session check to make sure I'm ready for the session. I'm familiar with what is needed. Let's go with the final check! |
|